You Deserve A Better Browser
Take Back Control With Brave

Block Data-Grabbing Ads!!
Earn Rewards For Browsing


900.00 US$ 100' of Insulated 2 x 1" O2 Barrier Pex (Seymour)

This could be Your Ad, Click HERE to post your own Ad!
Published date: April 30, 2014
  • Location: Indiana, Seymour, United States, United States
Item Status:

 


THERMOFLEX® is our line of highly efficient insulated PEX pipes. Specially designed to respond to the most intensive environments and climates, the PEX pipes are insulated with almost 5 inches of high quality, closed cell polyethylene foam which provides thermal performance and protection against water migration. The two GTPEX® or GTPEX-R® pipes are used for supply and return. GTGlobe Industries Research and Development team has created this high-tech foam under specific criteria in order to reach the maximum insulation performance.

The shell material is a virgin plastic corrugated tile pipe that prevents environmental water, harsh environmental conditions or particles to get into the system which could interrupt the efficiency of your installation. The heavy duty tiles also prevent the heart of THERMOFLEX® to be compressed which will also lose its thermo efficiency. The pipe should be installed underground for maximum insulation efficiency. Usage of THERMOFLEX® offers prime efficiency and flexibility in your most simple to most complex installations.

Currently THERMOFLEX® supports a 2 pipe system (supply and return) however, under demand, we can customize THERMOFLEX® to your specifications whether you want to increase or decrease the number of PEX pipes, or internal diameters, require specific colors or need to have electrical wires added to the system.

SPECIALLY RECOMMENDED FOR HIGH PERFORMANCE INSULATION REQUIREMENTS IN DIFFICULT ENVIRONMENT CONDITIONS, SOME OF THE USES ARE:



  • Hot water transport from one heating source to your radiant heat system.

  • Cold water transport in colder climate to prevent freezing. Please check your area requirements for the trench depth to install below frost line.

  • Cold water transport in hot climates to prevent the drinking water from getting too warm. This is particularly useful when installing PEX in attics in hot climates.

  • In geothermal systems, keeping the water the same temperature the THERMOFLEX® will keep the underground constant water temperature to the end location.

  • Water transportation from one location to another.


For more information call 877-305-0912 or go to our website at www.pexsource.com


ThermoFlex pre-insulated PEX is used to transport hot and cold water without losing the temperatures to operate your hydronic system in the most intensive environments. You can use both oxygen barrier PEX or non-oxygen barrier PEX depending on your boiler configuration. Open boiler systems may use both types of PEX while closed loop systems is recommended to use oxygen barrier ThermoFlex to prevent oxygen getting into the systems . Our insulated PEX comes with a 2 pipe system for supply and return. The PEX pipes are insulated with almost 5” of high quality closed cell polyethylene foam which provides thermal performance and protection against water migration. The nonporous outer shell is made of virgin plastic to protect the inner insulation and PEX pipes. There is about ¼” of air space between the outer shell and the insulation to help trap air for better insulation properties. The loss is about 1.2% on 100’ of insulated PEX. Configurations: You have a choice between 1” or 1 ¼” PEX pipe for supply and return. We can offer common coil sizes or custom coil sizes in increments of 10’. If you do not see your configuration, please give us a call for any custom pre-insulated PEX such as coil lengths, PEX sizes, and electrical wire insertion. Fitting Compatibility: Since this pipe is made in accordance to ASTM F 876/877, the dimensions meet the SDR9 criteria. Our PEX will work with any SDR9 dimension crimp or compression fitting. Please see our fittings page to find compatible fittings. Continuous Operating Temperatures and Pressures: In accordance to ASTM F877, the operating temperatures and pressures are as follows: · 73.4F at 160 PSI · 180F at 100 PSI · 200F at 80 PSI Every Coil is shipped on a pallet via freight. - Read more at http://www.pexsource.com/insulated-pex/thermoflex-insulated-pex-1-oxygen-barrier-pex-red-and-blue-100-ft.html


Tags: • find
Result 0 votes
Brenda Parks
0 votes

QR CODE

This Post has been Viewed (257) Times!

Useful Information

  • Avoid scams by acting locally or paying with PayPal
  • Never pay with Western Union, Moneygram or other anonymous payment services
  • Don't buy or sell outside of your country. Don't accept cashier cheques from outside your country
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"

Related Listings